I recently tried this resin out I am a resin artist . my paintings turned out like glass no clouding very happy with the results . easy to use I have tried most of the resins available in the uk. I shall continue to use this resin also its been great in moulds for petri art.
This product has a fixed shipping fee of £6.95 to Mainland UK. Call us for a quote if your delivery address is outside Mainland UK (Ireland, Scottish Highlands, Channel Islands, Isle of Man, Isle of Wight is counted as "outside Mainland UK" according to our couriers).
Amazing Clear Cast Epoxy Resin is an easy to use clear cast resin which does a brilliant job both as a casting and a pouring/coating resin!
A casting resin which works well for both thin coats and deeper casts. Using the Amazing Clear Cast Resin, only one product will allow you to create all sorts of projects; from coating paintings and filling bottle tops, to casting large bangles and paper weights.
Mixes in equal ratios (1:1 by volume) so very easy to measure up equal amounts of both parts.
Works perfectly with our resin moulds, with no release agent needed (however, release agents are a good way to extend the life of your mould). Can also be cast into plaster, aluminium, latex and urethane moulds if a mold making release (like Vaseline) is used.
Don't use water based dyes or colours with this resin. Our Alumilite Dyes are ideal (which come in a huge range of colours including fluorescent neon colours!), as well as any dry colours, like Pearl Ex. For high quality metal effects, use the Alumilite Metal Powders, which come in the following metal colours; pearlescent, bronze, gold, copper and silver. For a glow in the dark effect, use the Phosphorescent Powder!
Can be sanded, wet sanded, and/or buffed.
This kit will cover approximately 38-76 sq.ft. if used as a coating. Amazing Clear Cast works best if cast in sections less than 3/8" thickness.
7.5 litres is 2 US Gallons.
This resin has a weight of 8.4kg so equivalent to a 5 kg price of £83.30 inc vat or 10kg price of £166.61.
Mix ratio: 1:1 by volume
Work time: 45-50 min
Demould time: 18-24 hours. Please note: for deeper casts, allow 24-48 hours.
Please note: To help with thickness, keep the Alumilite Clear Cast at a minimum of 21°C or heat the thick side in a bowl of hot tap water for 30 minutes prior to use. The thicker ACC is poured, the cloudier it can be. For thicker castings, multiple pours of 6mm - 16mm approximately 4 hours apart is recommended.
TOP TIP FOR STORAGE: Keep the caps of each resin bottle on tight at all times. Even during use, pour out what you need, then put the caps back on immediately until your next use. This will keep your resin in good working condition for as long as possible.
Click here for an MSDS sheet for this product Complies with FDA CFR 177.2600
Regarding health & safety, we always recommend doing your own research, and make your own decisions on any precautions you need to take. Read the SDS and get advice if needed. We suggest ensuring you have good ventilation, and protect your skin and eyes (use nitrile gloves only, don’t use latex with resin). If you work with a large amount of resin, or work with it often, you might want to invest in a VOC filtered face mask.
This resin is brilliant for every resin project, pen blanks, resin art, woodturning projects
Iv been using clear cast for about a month now I was using a different brand before. With my old brand I used to get a few voids in my castings. But I have to say using clear cast I am yet to find any voids in my castings i can highly recommended clear cast resin. Regards Mark TQ Blanks
This is the best epoxy resin I've worked with great for jewellery and woodturning
My last purchase was indeed my first from metal clay Ltd, and consisted of alumilite, colours, pearl additives stirring sticks etc. I rate this company highly for their speed of delivery, for their customer service and the quality of their products. I hope to settle Dow n into being a regular customer. Thank you.