This is the "go to " in fill resin for woodturning, it's set time & easy finishing properties are perfect.
Amazing Clear Cast Resin is an easy to use resin which does a brilliant job both as a casting and a pouring/coating resin!
A casting resin which works well for both thin coats and deeper casts. Using the Amazing Clear Cast Resin, only one product will allow you to create all sorts of projects; from coating paintings and filling bottle tops, to casting large bangles and paper weights.
Mixes in equal ratios (1:1 by volume) so very easy to measure up equal amounts of both parts.
Works perfectly with our resin moulds, with no release agent needed (however, release agents are a good way to extend the life of your mould). Can also be cast into plaster, aluminium, latex and urethane moulds if a mold making release (like Vaseline) is used.
Don't use water based dyes or colours with this resin. Our Alumilite Dyes are ideal (which come in a huge range of colours including flourescent neon colours!), as well as any dry colours, like Pearl Ex. For high quality metal effects, use the Alumilite Metal Powders, which come in most metal colours you might want like; pearlescent, bronze, gold, copper and silver. For a glow in the dark effect, use the Phosphorescent Powder!
Can be sanded, wet sanded, and/or buffed.
This kit will cover approximately 38-76 sq.ft. if used as a coating. Amazing Clear Cast works best if cast in sections less than 3/8" thickness.
Mix ratio: 1:1 by volume
Work time: 45-50 min
Demould time: 18-24 hours
Approx 940ml (32 fl.oz)
Please note: To help with thickness, keep the Alumilite Clear Cast at a minimum of 21°C or heat the thick side in a bowl of hot tap water for 30 minutes prior to use. The thicker ACC is poured, the cloudier it can be. For thicker castings, multiple pours of 6mm - 16mm approximately 4 hours apart is recommended.
TOP TIP FOR STORAGE: Keep the caps of each resin bottle on tight at all times. Even during use, pour out what you need, then put the caps back on immediately until your next use. This will keep your resin in good working condition for as long as possible.
Click here for an MSDS sheet for this product. Complies with FDA CFR 177.2600
GOOD NEWS - THIS RESIN CAN ALSO BE SHIPPED TO OUR EUROPEAN CUSTOMERS!