A elegant pair of sterling silver cufflinks.
The arm and body of this silver round swivel cufflink fitting is assembled but needs to be attached to the cufflink front piece via the supplied 'U' joint & rivet pin.
The sterling silver 'U' joint is applied to the cufflink front. Once the 'U' joint is attached, the swivel fitting is pushed into the 'U' joint, and secured with the little rivet pin. See picture for more detail.
The 'U' joint should be soldered onto the cufflink front, or bonded with Clay-Bond Plus No-Solder Bond. It can also be set into and fired with the metalclay front - however, please note it isn't very large, so it needs to be done carefully so the metal clay doesn't cover the opening, where the rivet pin will go.
If fired the 'U' joint will go black, so needs to be pickled or sanded back.