Milliput - Terracotta - 113.4g

No reviews. Leave a review
£2.87 (Exc Tax)
£3.45 (Inc Tax)
Current Stock:
This product can now be bought on our sister site,

Milliput is a versatile manipulative two-part epoxy putty which can be used for almost anything! It is pliable and easily shaped after mixing, and sets rock hard in 2-3 hours.

Here's a few applications to name a few:

  • Modelmaking
  • Sculpting 
  • Restoration and repair
  • Underwater applications
  • Adhere to, seal or bond metals, wood, plastics, glass, tile, brick, cement, etc
  • DIY repairs - picture frames, terracotta pots, garden urns, brickwork, quarry tiles (internal and external)

How to use:

  • Take equal sized amounts from each stick, and blend together by rolling, kneading and folding around 30 times until the colour is uniform and streak-free.
  • It can then be manipulated like modelling clay, and used as needed.
  • The Milliput will go rock hard in 2-3 hours at normal room temperature, and will not shrink.
  • Once set, it can be turned, sawn, drilled, tapped, filed, sandpapered, painted, or cellulose sprayed.

How to repair a terracotta pot:

  • Scrub the pot to remove grease and dirt.
  • Knead equal amounts of the two sticks for 5 minutes until the colours become uniform. Mix slightly more Milliput than you think will be required.
  • Moisten the crack and firmly apply the Milliput, pressing with your fingers and thumbs.
  • Push the two pieces of the pot together with the putty stood proud of the crack
  • Use a spatula to work the putty into the crack. Keep the tools and putty moist. A sponge/wet cloth comes in useful.
  • Leave for an hour or so until the Milliput reaches the stage when it will cut cleanly with a sharp knife. Wet a sharp knife and cut off the surplus.
  • The next day, mix sufficient Milliput to cover the area of the crack on the inside. With a wet spatula feather the Milliput onto the good part of the pot. Leave until fully hardened.

To create a colour of your choice, you can:

  • Blend different milliput colours together
  • Mix a small amount of powder pigment (so that the mixture doesn't become too dry and crumbly)
  • Liquid colourings, like enamel paints, oil paints, spirit based-dyes or pigments can also be used to colour Milliput, but liquids or pastes may be difficult to introduce into the putty. Small quantities should be used to avoid creating a very wet mix that may be difficult to mix.

Please note: Milliput may cause an allergic skin reaction.

Milliput has a storage life of approximately 2 years when stored in cool, dry conditions. Place unused epoxy putty in polythene bags and re-seal. Storage at high temperatures or high humidity may reduce shelf life.


Milliput in Terracotta colour.

Size: 113.4g (4oz)


No one has reviewed this product! Write a Review

Related products

Customers also Viewed