Amazing Clear Cast Resin is an easy to use epoxy resin which does a brilliant job both as a casting and a pouring/coating resin!
A clear casting resin which works well for both thin coats and deeper casts. The Amazing Clear Cast Epoxy Resin is a fantastic product which allows you to create all sorts of projects; from coating photos and drawings, paintings and paper crafts, and filling bottle tops, to casting blanks, large bangles and paper weights. The ideal resin for both resin crafts, resin jewellery making and wood turning.
- Easy to use - ideal for beginners to resin crafts, jewellery making, pen blanks and turning. Just mix equal amounts of the two parts.
- Does both thick layers and thin coatings - it is rare to find a resin which does both well!
- Casts into a multitude of mould types.
- Nice long work time, 45-50 minutes.
- Ready to remove out of the mould in about 18-24 hours.
The Alumilite Amazing Clear Cast Epoxy Resin mixes in equal ratios (1:1 by volume) so very easy to measure up equal amounts of both parts.
Works perfectly with our resin moulds, with no release agent needed (however, release agents are a good way to extend the life of your mould). Can also be cast into plaster, aluminium, latex and urethane moulds if a mold making release (like Vaseline) is used.
Don't use water based dyes or colours with this resin. Our Alumilite Dyes are ideal (which come in a huge range of colours including fluorescent neon colours!), as well as any dry colours, like Pearl Ex.
For high quality metal effects, use the Alumilite Metal Powders, which comes in most metals you might want like; pearlescent, bronze, gold, copper and silver. For a glow in the dark effect, use the Phosphorescent Powder!
Can be sanded, wet sanded, and/or buffed.
This kit will cover approximately 2-4 sq.ft. if used as a coating. Amazing Clear Cast works best if cast in less than 3/8" thickness, for thicker pieces, it is best to do it in layers.
470ml is 16 US fl.oz.
This resin has a weight of 500 grams.
Mix ratio: 1:1 by volume
Work time: 45-50 min
Demould time: 18-24 hours. For deeper casts, allow 24-48 hours.
Approx 470ml (16 fl. oz.) - This resin is also available in a larger size (7.5 litres) here.
Please note: To help with thickness, keep the Alumilite Clear Cast at a minimum of 21°C or heat the thick side in a bowl of hot tap water for 30 minutes prior to use. The thicker ACC is poured, the cloudier it can be. For thicker castings, multiple pours of 6mm - 16mm approximately 4 hours apart is recommended.
TOP TIP FOR STORAGE: Keep the caps of each resin bottle on tight at all times. Even during use, pour out what you need, then put the caps back on immediately until your next use. This will keep your resin in good working condition for as long as possible.
Click here for an MSDS sheet for this product. Complies with FDA CFR 177.2600
Regarding health & safety, we always recommend doing your own research, and make your own decisions on any precautions you need to take. Read the SDS and get advice if needed. We suggest ensuring you have good ventilation, and protect your skin and eyes (use nitrile gloves only, don’t use latex with resin). If you work with a large amount of resin, or work with it often, you might want to invest in a VOC filtered face mask.
GOOD NEWS - THIS RESIN CAN ALSO BE SHIPPED TO OUR EUROPEAN CUSTOMERS!
Videos Hide Videos Show Videos
Amazing Clear Cast - Cast clear parts or cast a clear protective coating
Amazing Clear Cast can be used as a casting resin or as a clea...
Mold & Cast Bangle Bracelets by Alumilite
In this video we demonstrate how to make a one piece mold from...
How to Apply Liquid Glass Epoxy on a Bar Top with Amazing Clear Cast Resin | Alumilite
We captured how to pour clear epoxy resin, coat and seal in 10...
Resin Pen Blank Casting, Turning, & Polishing | Alumilite
Amazing Clear Cast by Alumilite Corporation is a 1 to 1 mix ra...
This is the "go to " in fill resin for woodturning, it's set time & easy finishing properties are perfect.
I've used other resins in the past but this is the one that gives consistently good long lasting results, and being a 1:1 it is also very easy to use. I wont use any other resin now.
I always seem to come back to this Alumilite Clear cast epoxy resin. Always gives a nice smooth finish. I use it on old LPs to make clocks and I do a bit of resin art on canvas. Always works really well. Just remember to keep the work area nice and warm to help with the fluidity of the resin. I keep my work area between 70-85f as resin doesn't work well at all in the cold.
I've tried many different brands but love this resin and won't try anything else now. The thickness of this resin means it is the only resin I have found that gives me the effect I want. The service from metalclay is 10/10 too, super fast postage even though I don't live in the Uk.
This is my go to resin for my craft, it is as it says, "Amazing". I use mine to clear coat and seal tumblers after decoration. I've used this from the start and it has performed well every time.
This resin is extremely good for projects/small jewellery and accessory businesses. The resin is very clear no yellow hues and dries rather quickly in comparison to some others however I have bought this resin multiple times and always seem to have a rather lot of part A left as theres more in the A bottle than B this is very annoying as you have to buy a new set of resin when you still have some left I find this a waste of product.
This is the best epoxy resin I've worked with great for jewellery and woodturning
This resin is brilliant for every resin project, pen blanks, resin art, woodturning projects
This resin top notch started using it five days ago long pot life does the job outstanding for what I bought it for