{"title":"Clear Resin Moulds","description":"","products":[{"product_id":"alphabet-ring-band-mould-art-clay-exclusive","title":"Alphabet \u0026 Ring Band Mould Art Clay Exclusive","description":"\u003ch1\u003eArt Clay exclusive mould for making ring bands, with alphabet moulds to create personalised rings.\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eCreate lovely personalised rings with this useful mould. It has a combination of 3 different ring band designs alongside the alphabet, numbers, and some symbols, all in one mould!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMake and dry the letters and attach them onto the ring band. Watch \u003ca href=\"https:\/\/www.youtube.com\/watch?v=PypvG4AXvWs\" target=\"_blank\" title=\"Ring band tutorial by Art Clay Silver\"\u003ethis really helpful step by step YouTube tutoria\u003c\/a\u003el by Art Clay on how to use the mould. \u003c\/li\u003e\n\u003cli\u003eYou can dry your clay in the mould, this will take about 24 hours in a warm room, or can be dried faster in a dehydrator or similar (keep the temperature under 90C).\u003c\/li\u003e\n\u003cli\u003eIf you're making rings it's better to pop the design out whilst wet so you can shape the ring around a mandrel. It is a good idea to spray the mould with a little\u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003e CoolSlip \u003c\/a\u003eor apply \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e to get the wet clay out easier without distorting the pattern.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe max ring size in clay form using this mould is T ½ after firing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHOW MUCH CLAY DO I NEED?\u003c\/strong\u003e\u003cbr\u003eEach letter needs approx 0.1g of Art Clay Silver to fill.  Please see the image below, which shows the maximum amount of Art Clay Silver needed to fill each ring band type to its full length. \u003c\/p\u003e\u003cp\u003e\u003cimg alt=\"product-image-template-52-111.png\" class=\"__mce_add_custom__\" height=\"118\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/product-image-template-52-111.png?v=1785150828\" title=\"product-image-template-52-111.png\" width=\"189\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMould size\u003c\/strong\u003e: approximately 44mm x 89mm x 7mm. \u003c\/p\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321553916239,"sku":"102-F-2286","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Art_Clay_Exclusive_Ring_Alphabet_Mould_102-F-2286.__47372.1716382340.800.800.png?v=1785150837"},{"product_id":"silicone-mould-3d-house-tree","title":"Silicone Mould - 3D House \u0026 Tree","description":"\u003ch1\u003e3D House \u0026amp; Tree Silicone Mould, great for metal clay jewellery making!\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis mould includes 3 sizes of houses with doorways and chimneys and a small fir tree. You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin! Perfect on its own as a pendant or as a charm!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS (approx):\u003c\/strong\u003e\u003cbr\u003eMould together: 45 x 37 x 18mm \u003cbr\u003eLarge house: 20 x 15 x 20mm\u003cbr\u003eMedium house: 15 x 12 x 15mm\u003cbr\u003eSmall house: 10 x 8 x 10 mm\u003cbr\u003eTree: 6 x 15 mm\u003c\/p\u003e\u003cdiv class=\"gmail_default\"\u003e\n\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFill \u003cstrong\u003eboth sides\u003c\/strong\u003e of the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator.\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould, if you are creating a 3D shape take both sides and secure them together with some \u003ca href=\"https:\/\/www.metalclay.co.uk\/art-clay-silver-paste-type-10gm\/\"\u003eArt Clay Paste.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"gmail_default\"\u003e\u003cp\u003e \u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321611948367,"sku":"102-F2519","price":12.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template_2__61901.1715784577.800.800.jpg?v=1785151659"},{"product_id":"silicone-mould-3d-tea-cup","title":"Silicone Mould - 3D Tea Cup","description":"\u003ch1\u003eTea Cup 3D Silicone Mould, perfect for metal clay jewellery making!\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis mould includes 3 sizes of tea\/coffee cups! You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin! \u003c\/strong\u003e\u003cstrong\u003eThis particular mould comes in 3 parts, the left and right-hand side of the mugs and domed top section which creates the mug shape that is empty inside.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003cbr\u003e\u003c\/strong\u003eMould together: 67 x 20 x 20mm approx\u003cbr\u003eSmall Cup: 13 x 8mm approx\u003cbr\u003eMedium Cup: 18 x 10mm approx\u003cbr\u003eLarge Cup: 22 x 13mm approx\u003c\/p\u003e\u003cdiv class=\"gmail_default\"\u003e\n\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFill \u003cstrong\u003eboth sides\u003c\/strong\u003e of the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator.\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould, if you are creating a 3D shape take both sides and secure them together with some \u003ca href=\"https:\/\/www.metalclay.co.uk\/art-clay-silver-paste-type-10gm\/\"\u003eArt Clay Paste.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321612079439,"sku":"102-F2469","price":12.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template_3__94065.1698748475.800.800.jpg?v=1785151662"},{"product_id":"silicone-mould-3d-ice-cream-cone","title":"Silicone Mould - 3D Ice Cream Cone","description":"\u003ch1\u003eIce Cream Cone 3D Silicone Mould, perfect for polymer clay jewellery making!\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis mould includes 2 sizes of Ice Cream Cones (minus the pointy bottom)! You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003cbr\u003e\u003c\/strong\u003eMould together: 40 x 19 x 20mm approx\u003cbr\u003eSmall cone: 12 x 20mm approx \u003cbr\u003eLarge cone: 15 x 25mm approx\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFill \u003cstrong\u003eboth sides\u003c\/strong\u003e of the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator or toaster oven (keep the temperature under 90C). This mould is also \u003cstrong\u003eoven safe up to 180°C!\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould, if you are creating a 3D shape take both sides and secure them together with some \u003ca href=\"https:\/\/www.metalclay.co.uk\/art-clay-silver-paste-type-10gm\/\"\u003eArt Clay Paste.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321612144975,"sku":"102-F2468","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template_5__24060.1698760974.800.800.jpg?v=1785151662"},{"product_id":"silicone-mould-3d-pot","title":"Silicone Mould - 3D Pot","description":"\u003ch1\u003ePot with Handles 3D Silicone Mould, perfect for metal clay jewellery making. \u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis mould includes 3 sizes of pots that could resemble an urn, a sugar pot and more! You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMEASUREMENTS:\u003cbr\u003eMould together: 64 x 22 x 32mm approx\u003cbr\u003eSmall pot: 12 x 16mm approx\u003cbr\u003eMedium pot: 16 x 20mm approx\u003cbr\u003eLarge pot: 22 x 27mm, approx\u003c\/p\u003e\u003cdiv class=\"gmail_default\"\u003e\n\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFill \u003cstrong\u003eboth sides\u003c\/strong\u003e of the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator or toaster oven (keep the temperature under 90C). This mould is also \u003cstrong\u003eoven safe up to 180°C!\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould, if you are creating a 3D shape take both sides and secure them together with some \u003ca href=\"https:\/\/www.metalclay.co.uk\/art-clay-silver-paste-type-10gm\/\"\u003eArt Clay Paste.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321612210511,"sku":"102-F2470","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template__25883.1698759008.800.800.jpg?v=1785151663"},{"product_id":"silicone-mould-3d-saturn","title":"Silicone Mould - 3D Saturn","description":"\u003ch1\u003eSaturn 3D Silicone Mould, perfect for metal clay jewellery making.\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis mould includes 3 sizes of the planet Saturn! You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin! Perfect for celestial, space themed designs or projects! \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003c\/strong\u003e \u003cbr\u003eMould together: 73 x 31 x 21mm approx\u003cbr\u003eSmall planet:  14mm diameter approx \u003cbr\u003eMedium planet: 15mm diameter approx\u003cbr\u003eLarge planet: 20mm diameter approx\u003c\/p\u003e\u003cdiv class=\"gmail_default\"\u003e\n\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFill \u003cstrong\u003eboth sides\u003c\/strong\u003e of the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator.\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould, if you are creating a 3D shape take both sides and secure them together with some \u003ca href=\"https:\/\/www.metalclay.co.uk\/art-clay-silver-paste-type-10gm\/\"\u003eArt Clay Paste.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321612276047,"sku":"102-F2475","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template_4__66907.1698760662.800.800.jpg?v=1785151665"},{"product_id":"silicone-mould-dome-multiple-sizes","title":"Silicone Mould - Dome - Multiple Sizes","description":"\u003ch1\u003eSmall, Medium or Large Dome sized silicone mould, perfect for resin jewellery making.\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eSilicone mould in a choice of small, medium or large domes. You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin (see photos for project ideas)! Perfect for making your own pendants or charms!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMould approx:\u003c\/strong\u003e 5 x 4 x 2mm\u003cbr\u003e\u003cstrong\u003e3 x small domes\u003c\/strong\u003e:10, 12 and 14mm diameter\u003cbr\u003e\u003cstrong\u003e3 x medium domes\u003c\/strong\u003e:16, 18 and 20mm diameter\u003cbr\u003e\u003cstrong\u003e2 x large domes:\u003c\/strong\u003e 22 and 25mm diameter\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFill \u003cstrong\u003eboth sides\u003c\/strong\u003e of the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator.\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould, if you are creating a 3D shape take both sides and secure them together with some \u003ca href=\"https:\/\/www.metalclay.co.uk\/art-clay-silver-paste-type-10gm\/\"\u003eArt Clay Paste.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Art Clay","offers":[{"title":"Small","offer_id":58321612341583,"sku":"102-F2342","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"Medium","offer_id":58321612374351,"sku":"102-F2498","price":13.95,"currency_code":"GBP","in_stock":true},{"title":"Large","offer_id":58321612407119,"sku":"102-F2500","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template_4__68118.1698762862.800.800.jpg?v=1785151666"},{"product_id":"silicone-mould-3d-doughnut-ring","title":"Silicone Mould - 3D Doughnut Ring","description":"\u003ch1\u003eDoughnut Ring 3D Silicone Mould, perfect for metal clay jewellery making.\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis mould includes 5 sizes of Doughnut Rings! The mould could also be used as flowers. You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003c\/strong\u003e\u003cbr\u003eMould: 54 x 46 x 14mm approx (when together). \u003cbr\u003eDoughnut Ring: 9 D x 3.5mm H, 11 D x 4mm , 13 D x 5mm H, 16 D x 6mm H, 22 D x 8mm H\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv class=\"gmail_default\"\u003e\u003cul\u003e\n\u003cli\u003eFill \u003cstrong\u003eboth sides\u003c\/strong\u003e of the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator.\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould, if you are creating a 3D shape take both sides and secure them together with some \u003ca href=\"https:\/\/www.metalclay.co.uk\/art-clay-silver-paste-type-10gm\/\"\u003eArt Clay Paste.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321612472655,"sku":"102-F2514","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template__83267.1715781161.800.800.jpg?v=1785151667"},{"product_id":"silicone-mould-3d-cherry-blossoms","title":"Silicone Mould - 3D Cherry Blossoms","description":"\u003ch1\u003e3D Cherry Blossom Silicone Mould, perfect for metal clay jewellery making!\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis mould includes 5 sizes of cherry blossoms, each with 5 petals! You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003c\/strong\u003e\u003cbr\u003eMould:  85 x 24 x 8mm, approx.\u003cbr\u003eFlower Sizes: 4, 5, 6, 7 and 8mm diameter. \u003c\/p\u003e\u003cdiv class=\"gmail_default\"\u003e\n\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFill \u003cstrong\u003eboth sides\u003c\/strong\u003e of the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator.\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould, if you are creating a 3D shape take both sides and secure them together with some \u003ca href=\"https:\/\/www.metalclay.co.uk\/art-clay-silver-paste-type-10gm\/\"\u003eArt Clay Paste.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321612603727,"sku":"102-F2014","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template_1__72630.1698836636.800.800.jpg?v=1785151670"},{"product_id":"silicone-mould-leaves","title":"Silicone Mould - Leaves","description":"\u003ch1\u003e3D Leaves Silicone Mould, great for metal clay jewellery making!\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis 3D mould includes 6 sizes of leaves! You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin. \u003c\/strong\u003eThe 3D double-sided pattern makes these ideal for earring or pendant designs. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003c\/strong\u003e\u003cbr\u003eMould(together):  56 x 32 x 8mm approx.\u003cbr\u003eFlower Sizes: 6 x 4mm, 8 x 6mm, 10 x 8mm, 14 x 9mm, 17 x 11mm, 20 x 14mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFill \u003cstrong\u003eboth sides\u003c\/strong\u003e of the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator.\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould, if you are creating a 3D shape take both sides and secure them together with some \u003ca href=\"https:\/\/www.metalclay.co.uk\/art-clay-silver-paste-type-10gm\/\"\u003eArt Clay Paste.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321612669263,"sku":"102-F2522","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template__43383.1698838248.800.800.jpg?v=1785151671"},{"product_id":"silicone-mould-grape-leaves","title":"Silicone Mould -  Grape Leaves","description":"\u003ch1\u003eGrape Leaves Silicone Mould, great for silver clay jewellery making.  \u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis mould includes 8 sizes of grape vine leaves, this could also make great ivy, sycamore or maple leaves! You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003cbr\u003e\u003c\/strong\u003eMould: 66 x 36 x 5mm approx.\u003cbr\u003eLeaf Sizes: 3 x 3mm, 6 x 6mm, 8 x 8mm, 10 x 10mm, 12 x 12mm, 15 x 15mm, 20 x 20mm, 25 x 25mm\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFill the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator.\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321612734799,"sku":"102-F2474","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template_3__49478.1715780157.800.800.jpg?v=1785151672"},{"product_id":"silicone-mould-whip","title":"Silicone Mould - Whip","description":"\u003ch1\u003eWhip Silicone Mould, can be used for Topping Food and Drink! \u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis mould includes 11 sizes and depths of a whip shape, perfect for putting on top of miniature food and drinks (hot chocolates \u0026amp; ice creams etc!). \u003c\/strong\u003eYou can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003cbr\u003e\u003c\/strong\u003eMould: 48 x 25 x 9mm approx.\u003cbr\u003e7 x Deep Sizes: range from 2.5 to 9mm.\u003cbr\u003e4 x Shallow Sizes: range from 4.5 to 12mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFill the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator.\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321612833103,"sku":"102-F2480","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template__77641.1698844143.800.800.jpg?v=1785151680"},{"product_id":"silicone-mould-perfume-bottles","title":"Silicone Mould - Perfume Bottles","description":"\u003ch1\u003ePerfume Bottles Silicone Mould, great for metal clay jewellery making!\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eThis mould includes 3 perfume bottles, one circle, one rectangle and one hexagon! You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003c\/strong\u003e \u003c\/p\u003e\u003cp\u003eMould: 55 x 22 x 8mm, approx. \u003cbr\u003eHexagon: 7 x 21mm\u003cbr\u003eRectangle: 11 x 21mm\u003cbr\u003eCircle: 17 x 21mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFill the mould with wet \u003ca href=\"https:\/\/www.metalclay.co.uk\/categories\/Metal-Clay\/\"\u003emetal clay\u003c\/a\u003e, ensure the clay is pushed in all the way down into the shape. The \u003cstrong\u003emould is transparent\u003c\/strong\u003e so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger\/\"\u003eBadger Balm\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/\"\u003eSlik Baby\u003c\/a\u003e before placing on the clay to avoid sticking.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend\u003cstrong\u003e drying for over 24 hours in a warm dry room.\u003c\/strong\u003e You can speed it up by putting the mould in a dehydrator.\u003c\/li\u003e\n\u003cli\u003eOnce dry, gently push the pieces out of the mould.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321613062479,"sku":"102-F-0985","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template__67301.1698856757.800.800.jpg?v=1785151683"},{"product_id":"silicone-mould-straight-alphabet","title":"Silicone Mould - Straight Alphabet","description":"\u003ch1\u003eUpper Case Silicone Alphabet Mould, perfect for metal clay jewellery making.\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eCreate adorable little alphabet initial pendants easily with this great alphabet mould. Made out of silicone, it is easy to use with precious metal clay as well as base metal clay. Also, great for resin, UV resin, and resin clay. \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUse as is for a charm or pendant, or cut off the eyelet and place on a backing sheet, or combine several letters into words - these are ideal little letters to play around with!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003c\/strong\u003e The mould is 60 x 80mm and each letter is about 7mm high. You need about 1gm of clay to be able to fill each letter properly, it's best to overfill the mould and scrape off the overflow before drying. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTO USE:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOil the mould.\u003c\/li\u003e\n\u003cli\u003eUse as fresh clay as possible and push it down into the mould. Overfill the mould and use the flat side of a clay scraper, or a spatula, to scrape off the overflow. Wrap up and save for future use.\u003c\/li\u003e\n\u003cli\u003eOnce pushed in, turn the mould over to check the front - as it is transparent, it's easy to ensure it is completely filled. \u003c\/li\u003e\n\u003cli\u003eSmooth over the surface with a damp finger to even it out. If needed, use the back of a brush handle or a soft silicone clay shaper to push the clay deeper into the mould.\u003c\/li\u003e\n\u003cli\u003eLeave to dry in the mould, the mould can be put in a dehydrator safely. Once the clay is completely dry, push it out.\u003c\/li\u003e\n\u003cli\u003eBe patient with the drying. It takes longer than you think to dry in the mould as the heat only gets in from the top and if you try to pull them out too soon, you could cause the shape to crack.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/youtu.be\/6tLsmzZXUUU?t=32\" target=\"_blank\"\u003eCheck out this video for ideas\u003c\/a\u003e on how to use the mould.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eWe recommend you test the product on the back of the mould before using it with new materials to ensure they're compatible.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eAlso available in a \u003ca href=\"https:\/\/www.metalclay.co.uk\/silicone-alphabet-mould-cursive\/\"\u003eCursive\u003c\/a\u003e type.\u003c\/p\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321613652303,"sku":"102-F-1806","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template_5__68211.1715777515.800.800.jpg?v=1785151691"},{"product_id":"makin-s-push-mould-christmas-nature","title":"Makin's Push Mould - Christmas Nature","description":"\u003ch1\u003eMakin’s Push Mold - Christmas Nature\u003c\/h1\u003e\u003cp\u003eThis plastic mould can be used for all types of clay and includes 11 Christmas shapes including, a bell, snowflakes and holly.\u003c\/p\u003e\u003cp\u003eIf you are using this push mould with metal clay, we recommend you use a little \u003ca href=\"https:\/\/www.metalclay.co.uk\/coolslip-antistick-spray-120ml\/?searchid=2717865\u0026amp;search_query=coolslip\"\u003eCoolSlip\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/badger-balm-organic-natural-non-stick-and-skin-care-unscented\/?searchid=2717869\u0026amp;search_query=badger+balm\"\u003eBadger Balm\u003c\/a\u003e, \u003ca href=\"https:\/\/www.metalclay.co.uk\/slik-baby-non-stick-balm\/?searchid=0\u0026amp;search_query=slik\"\u003eSlik\u003c\/a\u003e or olive oil on the mould before using.\u003c\/p\u003e\u003cp\u003eFor Polymer Clay, cornstarch can be used to prevent the clay from sticking.\u003c\/p\u003e\u003cp\u003eWhen pushing into the mould, check underneath for any air bubbles. Start with a ball of clay, rolling from the centre to the edges.\u003c\/p\u003e\u003cp\u003eChristmas Nature shape sizes range from approx 10mm up to 55mm.\u003c\/p\u003e","brand":"Makin’s","offers":[{"title":"Default Title","offer_id":58321747476815,"sku":"238-39008","price":3.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template__49428.1763475727.800.800.png?v=1785152869"}],"url":"https:\/\/www.metalclay.co.uk\/collections\/clear-resin-moulds.oembed","provider":"Metal Clay","version":"1.0","type":"link"}