{"title":"Metal work","description":"","products":[{"product_id":"pen-scriber-economy","title":"Pen Scriber - Economy","description":"\u003cp\u003eThis pen-shaped scriber has got a very sharp tip, perfect for writing on dry clay. Write or draw the design on your clay with a normal pencil, and follow up with the scriber. Leaves clean and crisp lines. Can also be used on the fired silver. The total tool is approximately 150mm long. This pen scriber gives a fine line compared to our other pen scribers.\u003c\/p\u003e","brand":"JWMetals ","offers":[{"title":"Default Title","offer_id":58320644473167,"sku":"171-365505","price":2.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/052A4153__12557.1644318304.800.800.png?v=1785147043"},{"product_id":"999-quality-stamp","title":"999 Quality Stamp","description":"\u003cp\u003eUse this hardened steel quality stamp to mark your fine silver silver pieces as 999 (pure fine silver). Place against the silver and strike gently with a hammer. Bent shank to make it easy to stamp rings. Each letter is about 0.8mm high and the stamped mark is about 1.6mm wide. Often called a hallmark stamp. Excellent for smaller pieces, or pieces you give away, which don't have to be hallmarked. \u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePlease note that according to UK law, this is not the same as hallmarking your piece, you're simply marking it with the quality. Hallmarking can only be done through a UK Assay office.\u003c\/strong\u003e\u003c\/p\u003e","brand":"JWMetals ","offers":[{"title":"Default Title","offer_id":58320645161295,"sku":"111-999","price":14.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/999-Stamp_1__67415.1461773128.800.800.jpg?v=1785147049"},{"product_id":"baking-soda-200gm","title":"Baking soda - 200gm","description":"\u003ch1\u003eBaking soda for craft and jewellery making use.\u003c\/h1\u003e\u003cp\u003eUse this to clean silver, and to neutralise any pickling solution possibly left on\/in your jewellery after pickling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo neutralise the acid:\u003c\/strong\u003e mix up about 1-2 tablespoons with a large mug of warm water and soak your pieces for about 15 minutes.\u003cbr\u003e\u003cstrong\u003eTo clean jewellery\u003c\/strong\u003e (perfect before oxidising with liver of sulphur etc): put a spoonful in the palm of your hand and add a few drops of water until you have a paste. Scrub your silver with the paste and rinse with clean water.\u003c\/p\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58320645292367,"sku":"102-F037","price":3.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/bakingsoda__69588.1775698811.800.800.png?v=1785147052"},{"product_id":"burnisher-medium-economy","title":"Burnisher Medium - Economy","description":"\u003ch1\u003eBurnisher Medium - Economy\u003c\/h1\u003e\u003cp\u003eGive your jewellery a polished shine with this economy burnisher. The fine tip allows you to accurately burnish small to medium details.\u003c\/p\u003e\u003cp\u003eMaximum diameter of 2.5mm.\u003c\/p\u003e\u003cp\u003eApproximately 15.5cm in length overall, with an easy to grip black rubber handle.\u003c\/p\u003e\u003cp\u003eSold Individually.\u003c\/p\u003e","brand":"JWMetals ","offers":[{"title":"Default Title","offer_id":58320648569167,"sku":"109-F031E","price":5.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template_1__66695.1781524567.800.800.jpg?v=1785147089"},{"product_id":"hammer-ball-pein-113g-4oz","title":"Hammer Ball Pein 113g (4oz)","description":"\u003cp\u003e\u003cspan\u003eIf you work with metals, a sturdy ball pein (or ball peen) hammer is a must-have, this should be in your tool case. It has a double-sided head with one flat side, and (the hint is in the name) a rounded (hemi-spherical), end. This hammer is sometimes referred to as a jobbing hammer.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThis hard-faced ball pein hammer is used for so many things in jewellery making and metal work, for instance:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlattening \u0026amp; shaping metal and wire\u003c\/li\u003e\n\u003cli\u003eUse with \u003ca href=\"https:\/\/www.metalclay.co.uk\/metal-stamps-punches\/\"\u003emetal stamps and punches\u003c\/a\u003e to imprint words and design shapes onto copper, brass, silver and pewter \u003ca href=\"https:\/\/www.metalclay.co.uk\/copper-brass-pewter-alkeme-blanks-1\/\"\u003eblanks\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardening \u003ca href=\"https:\/\/www.metalclay.co.uk\/wire-mesh\/\"\u003ewire\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemoving dents and deformations\u003c\/li\u003e\n\u003cli\u003eHammering charms and findings to add texture or give a distressed look\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis hammer is made of drop-forged steel, mounted on a hardwood handle.\u003c\/p\u003e\u003cp\u003eHead weight is 113g (4 ounces), overall length approximately 24cm.  \u003c\/p\u003e\u003cp\u003eThe flat end is 1.60cm (5\/8\") deep and the round end is 1.27cm (1\/2\") deep.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"JWMetals ","offers":[{"title":"Default Title","offer_id":58320875618639,"sku":"108-HAM01","price":3.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/HAM01__52631.1622807452.800.800.jpg?v=1785147676"},{"product_id":"inlay-chisel-rectangle-medium","title":"Chasing Punch \/ Inlay Chisel - Rectangle - Medium","description":"\u003ch1\u003eRectangle Chasing Punch and Inlay Chisel - Medium, this tool has multiple jewellery making uses! \u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eInlay chisels, also known as Japanese ‘Tagane’ chisels, are chisel blanks designed to be filed down into your own custom shape. Use inlay chisels with \u003ca href=\"https:\/\/www.metalclay.co.uk\/inlay-mosaics\/\"\u003emetal inlay mesh\u003c\/a\u003e to embed different coloured metal accents into fired silver - without the need of firing different metals together!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis new technique developed by Aida for use with Art Clay takes advantage of the unique softness of Art Clay Silver and enables everyone to use a traditional technique that previously only skilled craftsmen could use. \u003c\/p\u003e\u003cp\u003eThese tools can also be used without mesh for traditional chasing and repoussé techniques to shape and engrave sheet silver, or stamp patterns into fired metal clay which could be contrasted with \u003ca href=\"https:\/\/www.metalclay.co.uk\/patinas\/\"\u003epatina\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/gilding-wax\/\"\u003eGilding Wax\u003c\/a\u003e, etc.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eFirst, use a \u003ca href=\"https:\/\/www.metalclay.co.uk\/products\/Small-File-%252d-Medium%7B47%7DFine-%252d-Half-Round.html\"\u003emedium fine file\u003c\/a\u003e to make the tip of the chisel flat and level.\u003c\/li\u003e\n\u003cli\u003eThen file down to your desired shape (e.g. circle, triangle, star, teardrop, etc)\u003c\/li\u003e\n\u003cli\u003eSand end with \u003ca href=\"https:\/\/www.metalclay.co.uk\/wet-and-dry-abrasive-paper\/\"\u003e600 Grit to 1200 Grit Wet \u0026amp; Dry paper\u003c\/a\u003e to achieve a smooth finish (this ensures the mesh will be flattened smooth when it’s been hammered into the silver.)\u003c\/li\u003e\n\u003cli\u003eUse a hammer to strike your inlay tool over your piece at a 90° angle 2-3 times, with the mesh in between, on a \u003ca href=\"https:\/\/www.metalclay.co.uk\/steel-bench-block-vintaj\/\"\u003esteel block\u003c\/a\u003e or \u003ca href=\"https:\/\/www.metalclay.co.uk\/search.php?search_query=anvil\"\u003esmall anvil\u003c\/a\u003e. Then rotate the chisel around inside the stamped shape to cut the mesh (continue hammering while you do this if needed).\u003c\/li\u003e\n\u003c\/ol\u003e\u003cstrong\u003eSome helpful tips:\u003cbr\u003e\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFired metal clay must be no thinner than 1.5mm\u003c\/li\u003e\n\u003cli\u003eTo apply the inlay technique around rings, use a \u003ca href=\"https:\/\/www.metalclay.co.uk\/search.php?search_query=ring+mandrel\"\u003ering mandrel\u003c\/a\u003e while striking to ensure the ring doesn’t bend while hammering. Please note - we don’t recommend stamping where the ring is joined, as it can become weakened.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHardening (this needs to be done when using the tool on harder metals):\u003c\/strong\u003e\u003cbr\u003eTorch fire the tool at 800°C, this is the most common temperature to harden a chasing tool. If you are using a gas torch, the spot which you are heating must turn orange to show it is hot enough. Once the entire piece turns orange, quench it in water. *If you apply soap bar around the heating spots, you can minimize oxidation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTempering:\u003c\/strong\u003e\u003cbr\u003eFor tempering the tool we recommend the use of an electric kiln at 230°C. Unlike the hardening process where you quench it once it becomes orange, when tempering, the chisel needs to be held at 230°C for a specific time based on the volume. For reference, fire it 1 min.for 6g, 2mins for 10g, 3mins for 20g, and 4mins for 50g of steel. Quench in a water or oil after heating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuenching in water or oil:\u003c\/strong\u003e\u003cbr\u003eIn metal smithing, quenching in water is common, but you can choose whichever you like. When quenching in water, it will normally produce a harder and tougher chisel. Whereas quenching in oil will make it hard but less tough, which is often used for industrial purposes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShape:\u003c\/strong\u003e #3 Rectangle - Medium\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003c\/strong\u003e 90mm x 5mm, Chisel Tip: 4mm x 1.5mm\u003c\/p\u003e\u003cp\u003e\u003cimg alt=\"inlay2.jpg\" height=\"280\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/inlay2.jpg?v=1785148334\" title=\"inlay2.jpg\" width=\"286\"\u003e\u003cimg alt=\"inlay.jpg\" height=\"280\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/inlay.jpg?v=1785148334\" title=\"inlay.jpg\" width=\"317\"\u003e\u003c\/p\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321116332367,"sku":"102-F0163","price":3.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/F0163__51799.1720442569.800.800.png?v=1785148394"},{"product_id":"wire-twister-handle","title":"Wire Twister Handle","description":"\u003cp\u003eWire Twister\u003c\/p\u003e\u003cp\u003eTwist wire with ease, simply by turning a handle!\u003c\/p\u003e\u003cp\u003eCreates evenly twisted wire - use one strand to make jump rings, or combine multiple colours for a contrasting effect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to use:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAttach and twist 1-5 strands of wire around the plastic disk.\u003c\/p\u003e\u003cp\u003ePull taut, and attach the other end of the wires to a sturdy, stationary object.\u003c\/p\u003e\u003cp\u003eTwist handle until the wires are evenly twisted. If making jumprings, ensure wire is wrapping around a rod to make a hollow spiral as it twists.\u003c\/p\u003e\u003cp\u003eMultiple strands of twisted wire are stronger than one single wire.\u003c\/p\u003e\u003cp\u003eMaterial: Steel handle, with thick plastic disc.\u003c\/p\u003e","brand":"JWMetals ","offers":[{"title":"Default Title","offer_id":58321509253455,"sku":"108-TWST01","price":3.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Wire-Twister-2__72965.1582809453.800.800.png?v=1785150069"},{"product_id":"agate-burnisher-round-extra-fine-taper","title":"Agate Burnisher - Round Extra Fine Taper","description":"\u003ch1\u003eAgate Burnisher with a Round Extra Fine Taper, perfect for Keum-boo or creating shine on your jewellery!\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe tapered end and round shape helps create a polished shine on your jewellery.\u003c\/strong\u003e The grip handle makes using this agate burnisher easy and comfortable\u003c\/span\u003e. The fine tip allows you to accurately burnish narrow lines and hard to reach places. \u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMEASUREMENTS (approx): \u003c\/strong\u003eMaximum diameter of 8mm. \u003c\/span\u003e\u003cspan\u003e17.5cm Length. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eTo browse our selection of agate burnishers, \u003ca href=\"https:\/\/www.metalclay.co.uk\/agate-burnishers\/\"\u003eclick here\u003c\/a\u003e. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321531076943,"sku":"102-F-2156","price":23.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/F-2156_2__11856.1637917555.800.800.jpg?v=1785150394"},{"product_id":"the-1-step-looper-1-5-and-3mm","title":"The 1 Step Looper  - 1.5 and 3mm","description":"\u003ch1\u003eThe 1 Step Looper  Available as 1.5mm Loops with 26-18g Wire or 3mm Loops with 24-18g Wire.\u003c\/h1\u003e\u003cp\u003eThe One Step Looper pliers create and trim eye pins easily in one motion. They work with dead-soft or half-hard precious metal wire, craft wire, and copper or brass core wire. It will give you consistently sized loops every time.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThe 1.5mm will bend and trim wire between 26-18 gauge (0.41mm-1mm) and the 3mm will bend and trim wire between 24-18g (0.511mm - 1mm), enabling you to create custom length eyepins with a perfect loop every single time.  They are easy to use and are lightweight which is useful for projects with a lot of wire looping involved.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThe 1 step looper is primarily a right handed tool, although it can easily be used by a left handed person by turning the tool over or upside down. We would suggest holding the 1 step looper over a container or box to collect any unwanted scraps of wire to save you sweeping up afterwards.\u003c\/p\u003e","brand":"JWMetals ","offers":[{"title":"1.5mm","offer_id":58321614340431,"sku":"108-PLLOOP","price":27.95,"currency_code":"GBP","in_stock":true},{"title":"3mm","offer_id":58321614373199,"sku":"108-PLLOOP2","price":27.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template__45786.1711102065.800.800.jpg?v=1785151700"},{"product_id":"micro-mesh-soft-touch-pads-2-set-of-9","title":"Micro-Mesh Soft Touch Pads 2\" - Set of 9","description":"\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003ch1\u003eAMAZING SANDING AND POLISHING PADS! Micro-Mesh Soft Touch Pads 2\" x 2\" - Set of 9\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eThese Micro-Mesh polishing pads are just amazing. The silicone carbide Micro-Mesh range has long been one of Petra's favourite tools for finishing jewellery, and these pads can usually be found sitting on her studio table. The pads are double sided, ultra flexible and cushioned, making them perfect for metal clay and general jewellery finishing and polishing, as well as getting an amazing glossy finish on acrylic and resin turnings and casts. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe foam core provides additional flexibility and conformity, while being easy to hold and operate. \u003cspan\u003eEach pad is color coded and has the same Micro-Mesh® grade on both sides.  These pads can be rinsed, allowed to thoroughly dry and be stored away for further use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Pink 12000 will leave a scratch pattern that can't be detected by the human eye. Micro-Mesh offers outstanding results for a huge range of applications, and is extremely popular with jewellery artists, model builders, wood carvers, pen turners, musical instrument makers, luthiers,  furniture restorers and anyone who requires a highly polished surface. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePerfect for gentle sanding out of marks, preparing surfaces for polishing all the way up to a high polish, and touching up or repairing a scratch.\u003c\/p\u003e\n\u003cp\u003eBy using the higher grits on fired silver clay you can get the most amazing high polish with very little work.\u003c\/p\u003e\n\u003cp\u003eSuitable for gold, silver, acrylic, resin, corian, plastic, varnish, soft wood, coatings, gelcoat and polycarbonate.\u003c\/p\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\u003cdiv id=\"tab-description\" class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\"\u003e\n\u003cp\u003ePads can be washed and re-used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #008080;\"\u003eTip - A light touch works best. For resin - try sanding with some water for a smoother finish! Keep the colour card for reference so you know you are using them in the right order.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eGrits from coarse to fine:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1500 Brown\/Rust (FEPA 800 - Micromesh MX 180)\u003c\/li\u003e\n\u003cli\u003e1800 Green (FEPA 1200 - Micromesh MX 240) \u003c\/li\u003e\n\u003cli\u003e2400 Dark grey (FEPA 1500 - Micromesh MX 320) \u003c\/li\u003e\n\u003cli\u003e3200 Light grey (FEPA 2000 - Micromesh MX 360) \u003c\/li\u003e\n\u003cli\u003e3600 Dark Brown (FEPA 2500 - Micromesh MX 400) \u003c\/li\u003e\n\u003cli\u003e4000 Teal (FEPA 5 Micron - Micromesh MX 600) \u003c\/li\u003e\n\u003cli\u003e6000 Purple (FEPA 4 Micron - Micromesh MX 800) \u003c\/li\u003e\n\u003cli\u003e8000 Blue (FEPA 3 Micron - Micromesh MX 1200) \u003c\/li\u003e\n\u003cli\u003e12000 Pink (FEPA 1 Micron) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003ePad sizes are 2\" x 2\"  \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWhat is Micro Mesh?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMicro-Mesh™ is what we like to call a non-abrasive abrasive. It is considered a cushioned abrasive.\u003c\/p\u003e\n\u003cp\u003eConventional sandpaper is designed to be aggressive so that it will dig deeply. In its manufacture the crystals are electrically charged so that they will stand up. They are locked into a hard resin and when you apply the paper to a surface it will literally tear in and remove the substrate of the material you are sanding. The crystals cut in a negative raking motion, leaving inconsistent scratch patterns.\u003c\/p\u003e\n\u003cp\u003eMicro-Mesh™ does the opposite. The backing is long lasting cloth to which an ultra-flexible cushioning layer is applied. This cushioning layer will determine how far forward you can push crystals before they will penetrate the cushioning layer. On top of this layer, we have a very resilient glue, not a hard resin, but a completely flexible glue that will hold the crystals while allowing it to move and rotate. The crystals can turn in any direction without coming loose. When you start to apply pressure to sand with Micro-Mesh™, the crystals will go into the cushioning layer while beginning to cut a bit. If you push harder, they will go further into the cushioning layer, which serves as a safety valve. It determines how much pressure you can exert in a downward direction. Instead of a deep scratch that sandpaper makes, Micro-Mesh™ produce a refined scratch that is close to a RMS of 1.0. The cushioning layer also allows the crystals to cut with a planing motion that leaves an extremely consistent scratch pattern and allows you to achieve extraordinary levels of gloss.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWhere conventional abrasives will take surfaces down 2 or 3 thousandths (.002 or .003), Micro-Mesh™ will take it down one ten thousandth (.0001) or less.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWhat are Micro Mesh Regular grits? \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMicro-Mesh™ Regular Grits are slightly different to the FEPA grits. There are 9 different grades in total (4 are in this set of 2), ranging from 1500R to 12,000R. This is the equivalent of FEPA 600 to 1 micron. \u003c\/p\u003e\n\u003cp\u003eAll Grades are silicone carbide except Reg 8000 and 1200 Aluminium Oxide. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Micro Mesh","offers":[{"title":"Default Title","offer_id":58321621221711,"sku":"240-MM-PADS-REG","price":15.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/2_x_2_SOFT_TOUCH_PADS_VARIETY_..._-_REGULAR_ALL_GRADES_-_9_PADS_MIC-2X2SOFTPAD-REG__15149.1701789363.800.800.png?v=1785151767"},{"product_id":"tungsten-carbide-burnisher","title":"Tungsten Carbide Burnisher","description":"\u003ch1\u003eTungsten Carbide Burnishers for polishing metal!\u003c\/h1\u003e\u003cp\u003eGive your jewellery a polished shine with these Tungsten Carbide Burnishers which are available in both 2mm and 4mm.\u003c\/p\u003e\u003cp\u003eThey can also be used to scribe, the Tungsten Carbide tip is much more hardwearing than a normal high-speed steel scribe. This means that it can be used with very hard or abrasive materials without wearing out quickly, making it suitable for marking stainless steel, glass or ceramic – and of course, it can be used on softer materials as well.\u003c\/p\u003e\u003cp\u003eSize approx: 16.5cm in length\u003c\/p\u003e\u003cp\u003eAvailable\u003cspan\u003e in 2mm and 4mm.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eSold Individually.\u003c\/span\u003e\u003c\/p\u003e","brand":"JWMetals ","offers":[{"title":"2mm","offer_id":58321629315407,"sku":"152-FN027","price":12.95,"currency_code":"GBP","in_stock":true},{"title":"4mm","offer_id":58321629348175,"sku":"152-FN028","price":12.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Product_Image_Template_2__43018.1704717594.800.800.jpg?v=1785151799"},{"product_id":"pickleit-surface-prep-by-cooltools","title":"PickleIt™ Surface Prep by CoolTools","description":"\u003ch1 class=\"product-name-link\"\u003ePickleIt™ Surface Prep and pickle for metals - by CoolTools\u003c\/h1\u003e\u003cp\u003eCreated from a blend of natural 100% non-toxic food grade materials PickleIt™ is designed to remove copper oxides from most metals, including silver, bronze and copper. A great solution for removing the oxidization from your fired metal clay pieces!\u003c\/p\u003e\u003cp\u003eAlso ideal for preparing sterling silver to incorporate into metal clay and enamelling pieces.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo use:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAdd 1tbs of PickleIt™ per 8oz of water - distilled water is also better but not essential! A stronger concentration may work faster.\u003c\/p\u003e\u003cp\u003eHeat the solution in a glass, stainless steel container or small crockpot until it is boiling. Then lower the heat to maintain a gental simmer.\u003c\/p\u003e\u003cp\u003eLeave the pieces in the solution until the oxidiztion has gone and the metal has returned to its natural colour.\u003c\/p\u003e\u003cp\u003eIt is a good idea to neutralise your metal clay after pickling, this can be done by first rinsing your piece, then putting it in a mix of hot water and bicarbonate of soda. Leave for a few minutes and rinse.\u003c\/p\u003e\u003cp\u003eThis solution can be used with any stone that can withstand firing, and is safe to dispose of in a household drain.\u003c\/p\u003e\u003cp\u003eAvailable in 2 sizes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8oz - make 1 gallon of solution\u003c\/li\u003e\n\u003cli\u003e3lbs - makes 6 gallons of solution\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cool Tools","offers":[{"title":"8oz","offer_id":58321675551055,"sku":"103-501-040","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"3lb","offer_id":58321675583823,"sku":"103-501-035","price":37.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/PickleIt_8oz__68162.1727692212.800.800.jpg?v=1785152236"},{"product_id":"8-heavy-duty-plate-shears","title":"8\" Heavy Duty Plate Shears","description":"\u003ch1\u003e8\" Heavy Duty Plate Shears - Cut up to 20g Soft Metal\u003c\/h1\u003e\u003cp\u003eThese shears are designed for cutting sheet metal up to 20-gauge. The industrial shears have carbon steel blades which are ideal for metalworking, leather, fabrics, and other crafts! We use them to create metal jewelry such as bracelets or cuffs.\u003c\/p\u003e\u003cp\u003eThe 1.75\" blades can easily reach through sheet metal, the tips make clean snips which is excellent for detailed work.\u003c\/p\u003e\u003cp\u003eThese plate shears can be used with sterling silver, brass, copper, aluminum, and nickel sheet metal. \u003c\/p\u003e\u003cp\u003eTotal length of shears - 8\" (20.3cm)\u003c\/p\u003e","brand":"BeadSmith","offers":[{"title":"Default Title","offer_id":58321679581519,"sku":"108-SC80","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/8_Heavy_Duty_Plate_Shears__63720.1741092869.800.800.jpg?v=1785152285"},{"product_id":"wire-rounder-1-2mm-or-1-8mm","title":"Wire Rounder 1.2mm or 1.8mm","description":"\u003ch1 class=\"product-name-link\"\u003e\u003cspan title=\"Wire Rounder 1.2mm or 1.8mm\"\u003eWire Rounder 1.2mm or 1.8mm\u003c\/span\u003e\u003c\/h1\u003e\u003cp\u003eThis tool is so useful for anyone using wires in their work. It is used to round of your wire after it has been cut. Also called a cup bur.\u003c\/p\u003e\u003cp\u003eYou should use a wire rounder tool to smooth the sharp, flat edges of wire after it has been cut, creating a rounded, safe finish for jewellery-making or other wire-wrapping applications. This prevents sharp ends from poking, making pieces like earring hooks comfortable and safe to wear.\u003c\/p\u003e\u003cp\u003eSimply place the wire end in the cup, whilst pressing the wire firmly into the cup, turn the tool round and round until the edge of your wire has been rounded and smoothed off. The inside serrations file down the sharp edges to smooth them off.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis tool was designed for soft wire such as sterling silver, copper or gold-filled wires. Super easy to use and is perfect for both beginners and professionals. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailable sizes:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo fit up to 1.2mm wire\u003c\/p\u003e\u003cp\u003eTo fit up to 1.8mm wire\u003c\/p\u003e","brand":"BeadSmith","offers":[{"title":"1.2mm","offer_id":58321743118671,"sku":"108-RYW03","price":6.95,"currency_code":"GBP","in_stock":true},{"title":"1.8mm","offer_id":58321743151439,"sku":"108-RYW01","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Wire_Rounder_1.2mm___54673.1764686888.800.800.png?v=1785152783"},{"product_id":"jewellers-saw-frame-starter-set","title":"Jewellers Saw Frame Starter Set","description":"\u003ch1 class=\"product-name-link\"\u003e\u003cspan title=\"Jewellers Saw Frame Starter Set\"\u003eJewellers Saw Frame Starter Set\u003c\/span\u003e\u003c\/h1\u003e\u003cp\u003e\u003cspan title=\"Jewellers Saw Frame Starter Set\"\u003eThis set is fantastic for beginners and includes everything you need to get started with precision cutting.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan title=\"Jewellers Saw Frame Starter Set\"\u003eIncluded in Set:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan title=\"Jewellers Saw Frame Starter Set\"\u003e3\" High quality Adjustable Indian Saw Frame\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan title=\"Jewellers Saw Frame Starter Set\"\u003eThis saw frame offer excellent maneuverability for cutting curves, angles and corners. The blade tension can be adjusted for saw blades up to 7.5\" long.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cspan title=\"Jewellers Saw Frame Starter Set\"\u003e12 x Size 2\/0 German Saw Blades\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan title=\"Jewellers Saw Frame Starter Set\"\u003eMade from hardened and tempered special alloy steel all the blades a uniform in pitch and size for consistent results.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan title=\"Jewellers Saw Frame Starter Set\"\u003e\u003cstrong\u003eHardwood Bench Clamp\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan title=\"Jewellers Saw Frame Starter Set\"\u003eThis bench clamp easily attaches with a C-clamp to surfaces with a benched edge up to 1-3\/4 inches thick, while the V-slot provides superior access for making intricate cuts.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"JWMetals ","offers":[{"title":"Default Title","offer_id":58321743282511,"sku":"108-SAWF-KIT01","price":21.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Jewellers_Saw_Frame_Starter_Set__74785.1764692191.800.800.png?v=1785152786"},{"product_id":"third-hand-solder-stat-6-x-6","title":"Third Hand Solder Stat 6 x 6\"","description":"\u003ch1 class=\"product-name-link\"\u003e\u003cspan title=\"Third Hand Solder Stat 6 x 6\"\u003eThird Hand Solder Stat 6 x 6\"\u003c\/span\u003e\u003c\/h1\u003e\u003cp\u003e\u003cspan title=\"Third Hand Solder Stat 6 x 6\"\u003eDo you always run out of hands when soldering? Then this clever tool is just what you need! It features two adjustable arms with alligator clips which have ball joints that allow them to lock into place at any angle leaving both your hands free!\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan title=\"Third Hand Solder Stat 6 x 6\"\u003eIt also comes with a 6 x 6\" grey Transite board with a high heat tolerance of 1500°C and a solid cast-iron base which provides support and allows it to stand securely on your workbench.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eAnd you don't just have to use it for soldering! It's also great for repairing small pieces, beading, gluing, assembling and much more!\u003c\/p\u003e","brand":"BeadSmith","offers":[{"title":"Default Title","offer_id":58321743348047,"sku":"108-3HAND05","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Third_Hand_Solder_Stat_6_x_6__65553.1764757506.800.800.png?v=1785152787"},{"product_id":"small-file-fine-half-round","title":"Small File - Fine - Half Round","description":"\u003ch1\u003eFine Cut Half Round Hand File, a must-have in your jewellery making toolkit.\u003c\/h1\u003e\u003cp\u003e\u003cstrong\u003eHigh quality Japanese manufactured hand file. This half-round file is a must-have if you just want one file in your metal clay kit.\u003c\/strong\u003e It has one flat side and one concave side, meaning it can do many different jobs, whether you need to straighten up and edge or smooth out a curve (inside rings etc). A great all-rounder! It is a fine cut, so not too rough, but it still has enough of a bite to actually be useful when you need to reshape a piece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS:\u003c\/strong\u003e Tip is 5mm wide.\u003c\/p\u003e","brand":"Art Clay","offers":[{"title":"Default Title","offer_id":58321743741263,"sku":"102-F-0021","price":5.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Copy_of_Copy_of_Copy_of_Product_Image_Template_3__59420.1657539800.800.800__25759.1759753491.800.800.jpg?v=1785152792"},{"product_id":"rawhide-mallet-1-5","title":"Rawhide Mallet 1.5\"","description":"\u003ch1\u003e\n\u003cspan\u003eRawhide Mallet 1.5\" - an essential for jewellers!\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eA must have for any jewellers tool kit, used to shape and form metal without leaving scratches or marks. Ideal for gently stretching and forming rings and bangles around a mandrel and for work on textured pieces.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMade from tightly coiled leather these mallets provide a soft striking surface which is ideal when working with softer metals. The softer head also means the mallet can be trimmed, filed and sanded to remove damage from use.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eIt's really important to take care of your rawhide mallet to ensure it lasts as long as possible. To condition a new mallet you will need to remove the hard shellac or resin coating, soak the rawhide in water, and sand or rasp it to achieve a usable surface. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Water Buffalo Rawhide Head. Hickory Wood Handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHead Diameter:\u003c\/strong\u003e 1.5\" (38mm)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHead Length:\u003c\/strong\u003e 3\" (76mm)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal length of mallet:\u003c\/strong\u003e 10\" (267mm)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 150gms\u003c\/p\u003e","brand":"JWMetals ","offers":[{"title":"Default Title","offer_id":58321751834959,"sku":"108-HA006","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Rawhide_Mallet_1.5__48422.1764604968.800.800.png?v=1785152909"},{"product_id":"soldering-tripod-with-mesh-screen-6","title":"Soldering tripod with Mesh Screen 6\"","description":"\u003cdiv class=\"flex flex-col text-sm pb-25\"\u003e\u003carticle class=\"text-token-text-primary w-full focus:outline-none [--shadow-height:45px] has-data-writing-block:pointer-events-none has-data-writing-block:-mt-(--shadow-height) has-data-writing-block:pt-(--shadow-height) [\u0026amp;:has([data-writing-block])\u0026gt;*]:pointer-events-auto [content-visibility:auto] supports-[content-visibility:auto]:[contain-intrinsic-size:auto_100lvh] scroll-mt-[calc(var(--header-height)+min(200px,max(70px,20svh)))]\" dir=\"auto\" tabindex=\"-1\" data-turn-id=\"request-WEB:4447f2c6-7636-489a-8a06-e1533b2f2f89-0\" data-testid=\"conversation-turn-2\" data-scroll-anchor=\"true\" data-turn=\"assistant\"\u003e\u003cdiv class=\"text-base my-auto mx-auto pb-10 [--thread-content-margin:--spacing(4)] @w-sm\/main:[--thread-content-margin:--spacing(6)] @w-lg\/main:[--thread-content-margin:--spacing(16)] px-(--thread-content-margin)\"\u003e\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\" tabindex=\"-1\"\u003e\u003cdiv class=\"flex max-w-full flex-col grow\"\u003e\u003cdiv class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal [.text-message+\u0026amp;]:mt-1\" dir=\"auto\" data-message-author-role=\"assistant\" data-message-id=\"a9a24e74-9687-41c0-a9d9-e087adbdde90\" data-message-model-slug=\"gpt-5-2\"\u003e\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden first:pt-[1px]\"\u003e\u003cdiv class=\"markdown prose dark:prose-invert w-full wrap-break-word light markdown-new-styling\"\u003e\n\u003cp data-start=\"0\" data-end=\"73\"\u003e\u003cstrong data-start=\"0\" data-end=\"73\"\u003eSoldering and Enamelling Tripod with 6\" Mesh Screen – Stable, Safe \u0026amp; Versatile Heating Support\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"75\" data-end=\"359\"\u003eTake your soldering, enamel and other metalworking projects to the next level with this sturdy 6\" Tripod with Mesh Screen. Designed to provide a stable, elevated platform for heating from below, this essential tool gives you better control, improved access, and added protection for your workspace.\u003c\/p\u003e\n\u003cp data-start=\"361\" data-end=\"568\"\u003eWhether you're soldering, sweat soldering, torch firing, or using a gas burner or alcohol lamp, this tripod allows you to evenly apply heat from underneath your piece—ideal for precise and professional results.\u003c\/p\u003e\n\u003chr data-start=\"570\" data-end=\"573\"\u003e\n\u003ch3 data-start=\"575\" data-end=\"600\"\u003eWhy You’ll Love It\u003c\/h3\u003e\n\u003cp data-start=\"602\" data-end=\"822\"\u003e\u003cstrong data-start=\"602\" data-end=\"630\"\u003eStable \u0026amp; Secure Platform\u003c\/strong\u003e\u003cbr data-start=\"630\" data-end=\"633\"\u003eThe three 6.5\" legs create a steady base, while the 4.75\" heatproof open platform securely supports the included 6\" mesh screen. Work confidently without worrying about movement or tipping.\u003c\/p\u003e\n\u003cp data-start=\"824\" data-end=\"999\"\u003e\u003cstrong data-start=\"824\" data-end=\"858\"\u003ePerfect for Heating from Below\u003c\/strong\u003e\u003cbr data-start=\"858\" data-end=\"861\"\u003eElevating your piece allows for consistent, even heat distribution—essential for soldering, enamelling, Keum-Boo, and other techniques that require bottom heat.\u003c\/p\u003e\n\u003cp data-start=\"1001\" data-end=\"1170\"\u003e\u003cstrong data-start=\"1001\" data-end=\"1029\"\u003eFull Access to Your Work\u003c\/strong\u003e\u003cbr data-start=\"1029\" data-end=\"1032\"\u003eThe open design gives you access to all sides of your project, making adjustments, solder placement, and repositioning easy and efficient.\u003c\/p\u003e\n\u003cp data-start=\"1172\" data-end=\"1349\"\u003e\u003cstrong data-start=\"1172\" data-end=\"1202\"\u003eProtects Your Work Surface\u003c\/strong\u003e\u003cbr data-start=\"1202\" data-end=\"1205\"\u003eBy raising your project above the table, heat is kept away from your workbench. For maximum safety, always use on a fireproof soldering surface.\u003c\/p\u003e\n\u003cp data-start=\"1351\" data-end=\"1496\"\u003e\u003cstrong data-start=\"1351\" data-end=\"1377\"\u003eIdeal for Small Pieces\u003c\/strong\u003e\u003cbr data-start=\"1377\" data-end=\"1380\"\u003eThe included 6\" mesh screen is perfect for supporting smaller components while allowing heat to pass through evenly.\u003c\/p\u003e\n\u003cp data-start=\"1498\" data-end=\"1659\"\u003e\u003cstrong data-start=\"1498\" data-end=\"1515\"\u003eVersatile Use\u003c\/strong\u003e\u003cbr data-start=\"1515\" data-end=\"1518\"\u003ePlace it over a Bunsen burner or alcohol lamp to heat small pots or vessels. Suitable for both beginners and professional metalworkers alike.\u003c\/p\u003e\n\u003chr data-start=\"1661\" data-end=\"1664\"\u003e\n\u003ch3 data-start=\"1666\" data-end=\"1688\"\u003e? What’s Included\u003c\/h3\u003e\n\u003cul data-start=\"1690\" data-end=\"1859\"\u003e\n\u003cli data-start=\"1690\" data-end=\"1778\"\u003e\n\u003cstrong data-start=\"1692\" data-end=\"1708\"\u003eTripod Stand\u003c\/strong\u003e\u003cul data-start=\"1713\" data-end=\"1778\"\u003e\n\u003cli data-start=\"1713\" data-end=\"1742\"\u003e\u003cp data-start=\"1715\" data-end=\"1742\"\u003e3 sturdy legs (6.5\" each)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli data-start=\"1745\" data-end=\"1778\"\u003e4.75\" heatproof open platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1780\" data-end=\"1859\"\u003e\n\u003cstrong data-start=\"1782\" data-end=\"1800\"\u003e6\" Mesh Screen\u003c\/strong\u003e\u003cul data-start=\"1805\" data-end=\"1859\"\u003e\u003cli data-start=\"1805\" data-end=\"1859\"\u003e\u003cp data-start=\"1807\" data-end=\"1859\"\u003eIdeal for small jewellery pieces and delicate work\u003c\/p\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1861\" data-end=\"1864\"\u003e\n\u003ch3 data-start=\"1866\" data-end=\"1914\"\u003e? Recommended Accessories (Sold Separately)\u003c\/h3\u003e\n\u003cp data-start=\"1916\" data-end=\"1972\"\u003eFor the best results, consider pairing your tripod with:\u003c\/p\u003e\n\u003cul data-start=\"1974\" data-end=\"2308\"\u003e\n\u003cli data-start=\"1974\" data-end=\"2020\"\u003eA butane micro torch with adjustable flame\u003c\/li\u003e\n\u003cli data-start=\"2021\" data-end=\"2065\"\u003eSteel tweezers with heat-resistant grips\u003c\/li\u003e\n\u003cli data-start=\"2066\" data-end=\"2110\"\u003eA soldering pick for precise adjustments\u003c\/li\u003e\n\u003cli data-start=\"2111\" data-end=\"2171\"\u003eA helping hand (third hand tool) to hold pieces securely\u003c\/li\u003e\n\u003cli data-start=\"2172\" data-end=\"2250\"\u003eSolder (paste, chips, wire, or sheet – experiment to find your preference)\u003c\/li\u003e\n\u003cli data-start=\"2251\" data-end=\"2308\"\u003ePickling solution for proper cleaning after soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2310\" data-end=\"2313\"\u003e\n\u003ch3 data-start=\"2315\" data-end=\"2334\"\u003e⚠️ Safety First\u003c\/h3\u003e\n\u003cp data-start=\"2336\" data-end=\"2366\"\u003eWhen working with open flames:\u003c\/p\u003e\n\u003cul data-start=\"2367\" data-end=\"2552\"\u003e\n\u003cli data-start=\"2367\" data-end=\"2407\"\u003eAlways use in a well-ventilated area\u003c\/li\u003e\n\u003cli data-start=\"2408\" data-end=\"2474\"\u003ePlace the tripod on a fireproof soldering board, mat, or block\u003c\/li\u003e\n\u003cli data-start=\"2475\" data-end=\"2508\"\u003eKeep flammable materials away\u003c\/li\u003e\n\u003cli data-start=\"2509\" data-end=\"2552\"\u003eHandle hot items with appropriate tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2554\" data-end=\"2557\"\u003e\n\u003cp data-start=\"2559\" data-end=\"2820\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eWhether you're just getting started or expanding your workshop setup, this Tripod with 6\" Mesh Screen is a practical, reliable tool that improves precision, safety, and overall results in your metalworking projects. A must-have addition to any jeweller’s bench.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/article\u003e\u003c\/div\u003e","brand":"BeadSmith","offers":[{"title":"Default Title","offer_id":58321752326479,"sku":"108-SOL1056","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Tripod_with_Mesh_Screen_6__27510.1764760170.800.800.png?v=1785152917"},{"product_id":"fine-grit-sanding-pad-set-set-of-2","title":"Fine Grit Sanding Pad Set - Set of 2","description":"\u003ch1 class=\"product-name-link\"\u003e\u003cspan title=\"Fine Grit Sanding Pad Set - Set of 2\"\u003eFine Grit Sanding Pad Set - Set of 2\u003c\/span\u003e\u003c\/h1\u003e\u003cp\u003eThis is a set of 2 sanding pads includes a 2000 grit and a 2500 grit, perfect for very fine work and polishing your silver up to a super shine!\u003c\/p\u003e\u003cp\u003eThese sponge backed sanding pads are excellent to use with your metal clay. They are soft and flexible so wraps smoothly around your piece. We love these, and couldn't be without them!\u003c\/p\u003e\u003cp\u003eUse them dry on the clay, or wet on the fired metal for a beautiful polish. Rinse after use and they'll last a long time. We usually cut them up in thin strips which are easier to work with.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMEASUREMENTS (per sanding pad): \u003c\/strong\u003e100 x 80 x 5mm.\u003c\/p\u003e","brand":"JWMetals ","offers":[{"title":"Default Title","offer_id":58321761927503,"sku":"234-FINESAND","price":3.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/2591\/2911\/files\/Fine_Grit_Sanding_Pad_Set_-_Set_of_2__15057.1771495393.800.800.png?v=1785153039"}],"url":"https:\/\/www.metalclay.co.uk\/collections\/metal-work.oembed","provider":"Metal Clay","version":"1.0","type":"link"}