Deluxe Resin, Colour and Mould Set

No reviews. Leave a review
£80.79 £74.96 (Exc Tax)
£96.95 £89.95 (Inc Tax)
You save £7.00
Current Stock:
This product can now be bought on our sister site,
Due to Brexit the following countries do NOT allow imports of this item:

Our Deluxe Resin, Colour and Mould Set is a great selection of some of our best resin casting products. The perfect gift for a resin lover, or an ideal money-saver if you're just starting out.

(Limited number of sets at this fantastic introductory price. Save 19% on items bought separately!)

  • 32 fl oz of Alumilite Amazing Clear Cast Resin.

    This is an easy to use epoxy resin which does a brilliant job both as a casting and a pouring/coating resin.

    A clear casting resin which works well for both thin coats and deeper casts. Mixes in equal ratios (1:1 by volume) so very easy to get measurements correct. 940ml is 32 US fl.oz. This resin has a weight of 1.15kg.

  • 6" Lizard Blanks Pen Blank Mould.

    Use with resin on its own, or mix in wood offcuts, pinecones, pasta, pencils (your imagination is the limit!), and more, to create beautiful pen blanks. Blanks can then be shaped and refined using a lathe. This unique mould design uses wing nuts, allowing you to de-mould blanks faster than ever - the mould is tool-free, and no mould release agent is required. Made from precision cut Premium UHMW (Ultra High Molecular Weight) Plastic.
    Size: H 2.54cm x W 2.54cm x L 15.24cm (1" x 1" x 6”)

  • Casters Choice Mica Powders - 30 colour sample set.

    This is a great chance to try a sample of every single one of all the amazing 30 Caster's Choice colours! A little powder goes a long way, so start with less than you think you need. If you combine it with dyes, it will go even further for a rich, luxurious, metallic shimmer.
    Sample size: approx 1.4g per individual pot.

  • 4 x Professional quality dye colours for resin. 1 fl oz each of Red, Blue, Yellow and White.

    The Alumilite vividly coloured liquid resins can be used for a translucent effect, or use more to give an even and complete colour. Add the dye to the "A" side of the resin by weight up to 5% to achieve the colour and tint you desire. One drop goes far!


Resin advice;

Mix ratio: 1:1 by volume

Work time: 45-50 min
Demould time: 18-24 hours. For deeper casts, allow 24-48 hours. 

Please note: To help with thickness, keep the Alumilite Clear Cast at a minimum of 21°C or warm the thick side in a bowl of hot tap water for 30 minutes prior to use. The thicker ACC is poured, the cloudier it can be. For thicker castings, multiple pours of 6mm - 16mm approximately 4 hours apart is recommended.

TOP TIP FOR STORAGE: Keep the caps of each resin bottle on tight at all times. Even during use, pour out what you need, then put the caps back on immediately until your next use. This will keep your resin in good working condition for as long as possible. 

Click here for an MSDS sheet for this product. Complies with FDA CFR 177.2600

Click here for a Technical Data sheet for this product.

Regarding health & safety, we always recommend doing your own research, and make your own decisions on any precautions you need to take. Read the SDS and get advice if needed. We suggest ensuring you have good ventilation, and protect your skin and eyes (use nitrile gloves only, don’t use latex with resin). If you work with a large amount of resin, or work with it often, you might want to invest in a VOC filtered face mask.

No one has reviewed this product! Write a Review

Related products

Customers also Viewed