Product Description
Silicone Mould - Rose Flowers and Leaves
Create tiny roses and petals in metal clay, polymer clay, and resin. Ideal to make matching jewellery sets of earrings, pendants, and rings.
To use:
Fill the mould with wet clay, ensure the clay is pushed in all the way down into the shape. The mould is transparent so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Leave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend drying for over 24 hours in a warm dry room. You can speed it up by putting the mould in a dehydrator or toaster oven (keep the temperature under 90C).
Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier.
Includes 12 x Roses in varied sizes, 3 single leaves, and 3 double leaves.
Approximate diameter of roses: 3mm, 4mm, 4.5mm, 5mm, 6mm, 6.5mm, 7mm, 8.5mm, 9.5mm, 12mm, 14m, 17mm
Size of single petals: 2 x 5mm, 3 x 7mm, 4 x 9mm
Size of double petals: 4.5 x 5.5mm, 6 x 7.5mm, 8 x 10mm
Size of mould: 50 x 50mm
Product Videos
Custom Field
Product Reviews
2 Reviews
-
Silicone mould rose & Leaves
Fine quality
-
works well
Really impressed with the detail that came out of these moulds - even for the smaller flowers and leaves!!