Tulip Embossing Cutter available in 4 sizes from Sully's Clay!

This tulip cutter is available in 20 x 19.5mm, 25 x 24mm, 30 x 29mm & 35 x 24mm. Embossing Cutters Cut specific shapes while also creating an embossed pattern within the outline design. 

How to Use: Prepare the Clay - Roll your clay to a minimum of 0.25mm thicker than your chosen depth of cutter.  Lightly Oil the edge and embossing surface of the clay cutter to prevent sticking.

Cut the Clay/Leave the emboss - Place the cutter on the clay and press down to cut the outline and the embossing detail will leave an imprint.

Dry and Fire - Let the clay dry completely, then fire it according to the instructions for your metal clay.

Tips for best results! Use clingfilm to achieve rounded edges, this also helps clay sticking to the cutter/embossing lines.

Apply texture before you cut out your design but be careful not to over emboss as this can create weak spots which can break.

Care Instructions: Hand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.

Safety Notice: This product is not a toy and is not suitable for children. Choking Hazard

Material: Made from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.

How They’re Made: Each cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.

Cutter Blade: 0.2mm Depth: 0.50mm (2cards)

Available in 20 x 19.5mm, 25 x 24mm, 30 x 29mm & 35 x 24mm