Mermaid Tail Micro Cutter available in 10mm & 15mm from Sully's Clay!

This mermaid tail cutter is available in 10mm and 15mm! Each size comes with a push stamp.

How to Use: Prepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.

Cut the Clay - Place the cutter on the clay and press down to cut the shape.

Clay Stuck? - Apply a small amount of oil to the end of the push pen. Align the size indicators so the stamp fits properly inside the cutter, then press down. Your clay will pop out easily!

Dry and Fire - Let the clay dry completely, then fire it according to the instructions for your metal clay.

Tip! Your push stamp can also be used as a detailing tool! Simply apply a light coat of oil to the surface and test on scrap clay to perfect your pressure and achieve the ideal depth.

Care Instructions: Hand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.

Safety Notice: This product is not a toy and is not suitable for children. Choking Hazard

Material: Made from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.

How They’re Made: Each cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.

Micro Cutters Blade sharpness- 0.2mm-0.25mm

Available in 10mm & 15mm