Feather Silicone Mould, perfect for metal clay pendants, earrings and rings!

Create feather shapes in metal clay, polymer clay, and resin. Make matching jewellery sets of earrings, pendants, and rings. Use the long feather shapes to create wrap-around rings, and the two smaller for matching earrings and pendants.

To use:

1. Fill the mould with wet clay, ensure the clay is pushed in all the way down into the shape. The mould is transparent so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles.
2. Leave to dry in the mould. Be patient with the drying! It takes longer than you think to dry whilst in the mould, as the heat only gets in from the top. If you try to pull the moulded shapes out too soon, you'll wreck or distort the shape. We recommend drying for over 24 hours in a warm dry room. You can speed it up by putting the mould in a dehydrator or toaster oven (keep the temperature under 90C). 

MEASUREMENTS (approx):
Mould: 77 x 44 x 6mm
Feathers: 3.3cm L x 1.2cm W
Thinnest ring band: 7.4cm L x 0.5 cm W.
Thickest ring band: 7.2cm L x 1 cm W.