Fine Silver Flat Bezel Strip Wire - 4mm wide, 50cm
SPECIAL OFFER - SAVE 20%!
We have a small amount of very lightly tarnished wires, save 20%! The tarnish can easily be polished off, it will also burn off if soldered or embedded in silver clay.
Fine silver flat wire can be fired with all types of silver clay, or can be soldered on after firing. Make bezels for stones and cabochons with this flat wire - ideal for any stone that can't be set into clay before firing, like a lot of natural stones. Simply shape around your stone, cut the ends straight so they match up. Solder close or simply leave as is, then press into the wet clay.
Push the wire tight against the stone (after firing) with a burnisher, bezel pusher/roller, or bezel/prong closer.
4mm wide/0.2mm thick (we also have this wire in a 6mm width for deeper cut stones)