This 3M™ Texturing & Satin Finishing Kit has the best of both worlds: a combination of 3M™ Radial Bristle Brushes and 3M™ Scotch-Brite Surface Conditioning Wheels (A.K.A The Scrubby Wheels).
Quickly clean up oxidized metals, sand down tarnish, remove paint or varnish on wood or provide a lovely satin finish or brushed texture to almost any metal, and some plastics.
- 1x 80 Grit 3M™ Radial Bristle Brush (Yellow)
- 1x 120 Grit 3M™ Radial Bristle Brush (White)
- 1x 220 Grit 3M™ Radial Bristle Brush (Maroon)
- 1x Medium 3M™ "Scrubby" Scotch-Brite Surface Conditioning Wheel
- 1x Fine 3M™ "Scrubby" Scotch-Brite Surface Conditioning Wheel
- 1x Very Fine 3M™ "Scrubby" Scotch-Brite Surface Conditioning Wheel
Also known as the 3M™ Scotch-Brite Surface Conditioning Wheels, these abrasives are great for sanding and texturing metals. They also work well for removing paint, stains and other coatings from most hard surfaces. You can make brushed finishes at various angles, with a variety of grits. Perfect for that modern, distressed look.
3M RADIAL BRUSHES
The perfect alternative to wire brushes. These versatile 3M™ Scotch-Brite™ brushes are excellent on any metal & wood for sanding, cleaning, texturising and polishing.
These require minimal pressure and easily get into tight areas, crevices and contours. Minerals embedded in their flexible thermoplastic composition replace the need for any messy rouge or compound. Use dry, no water needed!
Jewelry applications*: Excellent for cleaning medium to large size metal castings. Also great for adding a brushed texture to belt buckles, large pendants, silverware, etc.
Automotive and Woodworking applications*: Ideal for sanding and removing paint, stain and coatings. Cleans up automotive trim, brightwork, paint, engine components and oxidised surfaces. Leaves a coarse brushed texture. Can also be used to sand turned wood pieces, bowls, carvings and more. Use these abrasives during the rougher stages of wood finishing and prep work.
Other fun applications*: Clean old golf clubs and drivers! Can also be used to add a texture to door handles.
* Not recommended for carbide (high-carbon) metals, lapidary or glass.