Prometheus Sunny Bronze Clay Syringe - 10g

No reviews. Leave a review
£7.46 (Exc Tax)
£8.95 (Inc Tax)
Current Stock:
SKU:
109-PSB10S

Prometheus Sunny Bronze Clay is a clay-like material which turns into pure, solid bronze when fired in a kiln. It is a mixture of micron sized bronze powder, water and organic binder. It can be formed by hand, rolled into a sheet or a rope. It can be molded, textured, even turned on a potter's wheel. Prometheus Sunny Bronze Clay can be fired with most lab-created gemstones (cubic zirconias), pre-tested natural stones, glass beads, ceramic and porcelain. 

When the clay is fired in a kiln, the organic binder evaporates and burns away and you’re left with pure, solid bronze. Brush it, if needed pickle it to remove any firescale and finally polish. 

You can create unique jewellery, ornaments, hollow ware, statutes, sculptures and many other decorative objects. Any thing you create with Prometheus® Sunny Bronze Clay is a piece of art. Combine it with your imagination and let your fingers do the rest!

HOW TO FIRE

Prometheus Sunny Bronze clay can be fired on a single stage, or two-stage firing:

SINGLE STAGE: 

  1. Preheat your kiln to 820°C/1500°F.
  2. Place your dried bronze piece onto stainless steel mesh, and into the kiln
  3. Wait for the kiln to heat back up to temperature, and fire for 30 minutes
  4. After 30 minutes, remove the piece and leave to cool on a heatproof surface, or quench in water (unless fireable gemstones have been used). Leave in pickling solution if any fire scale is left.

TWO STAGE (recommended):

  1. Place your dried piece(s) onto stainless steel mesh, and into a cold kiln
  2. Wait for the kiln to heat up to 500°C/932°F and fire for 15 minutes
  3. Once finished, remove the piece and leave to cool on a heatproof surface
  4. Preheat your kiln to 820°C/1500°F
  5. Pour 3cm of activated carbon into a steel container, and place pieces at least 1.5cm apart
  6. Thoroughly cover with activated carbon, and place steel container inside the kiln
  7. Wait for the kiln to heat back up to temperature, and fire for 1 hour
  8. Once finished, remove the piece and leave to cool on a heatproof surface

 

*Also available in 50g, 100g and 200g clay here*

Syringe contains 10g

No one has reviewed this product! Write a Review

Related products

Customers also Viewed