Product Description
Foredom H.MH-110 Brush Type Hammer Handpiece for stone setting and engraving!
This hammer handpiece is designed to close bezels, set stones, surface texturing and add decorative work - this handpiece is a dream for a jewellery maker! The Hammer action engages ONLY when light pressure is applied, preventing unintended marks and to allow precise placement of the tool tip.
You can adjust the force of impact (the hammers impact) from light to full by turning the knurled metal ring whilst the motor is off or running.
The speed of the hammer action can be varied from 0– 2,500 strokes per minute using the control box dial.
Comes with adapters, anvil points, graver holder, screwdriver and spare motor brush pair. And has a coiled cord to connect the handpiece to the Control Unit.
To be used with K.1080, K.1090 and K.1053 machines.
Shank Sizes: 2.35mm (3/32") and 3.175mm (1/8")
Size: 15.8cm (6 1/4”) long
Max RPM 10,000
