Product Description
Full Set of Ring Cutters (29pcs) from Sully's Clay!
This Full Set of 29 Ring Cutters is everything you need to craft your own beautiful rings from A to Z+3!
Use 2 of these cutters to create the ring, one serves as the outer diameter and the other as the inner (size of the ring).
Sizing: All cutters are based on UK ring sizes.
| Circumference | Inside Diameter | Ring Size |
| (mm) | (mm) | UK |
| 37.8mm | 11.9mm | A |
| 39.1mm | 12.3mm | B |
| 40.4mm | 12.7mm | C |
| 41.7mm | 13.1mm | D |
| 42.9mm | 13.5mm | E |
| 44.2mm | 13.9mm | F |
| 45.5mm | 14.3mm | G |
| 46.8mm | 14.7mm | H |
| 48.0mm | 15.1mm | I |
| 48.7mm | 15.5mm | J |
| 50.0mm | 15.9mm | K |
| 51.2mm | 16.3mm | L |
| 52.5mm | 16.7mm | M |
| 53.8mm | 17.1mm | N |
| 55.1mm | 17.5mm | O |
| 56.3mm | 17.9mm | P |
| 57.2mm | 18.2mm | Q |
| 58.9mm | 18.6mm | R |
| 60.2mm | 19.1mm | S |
| 61.4mm | 19.5mm | T |
| 62.7mm | 20.0mm | U |
| 64.0mm | 20.3mm | V |
| 65.3mm | 20.7mm | W |
| 66.6mm | 21.1mm | X |
| 67.8mm | 21.5mm | Y |
| 68.5mm | 21.9mm | Z |
| 70.0mm | 22.2mm | Z+1 |
| 71mm | 22.6mm | Z+2 |
| 72.5mm | 23.0mm | Z+3 |
How to Use: Prepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.
Cut the Clay - Place the cutter on the clay and press down to cut the shape.
Clay Stuck? - Apply a small amount of oil to the end of the push pen.
Dry and Fire - Let the clay dry completely, then fire it according to the instructions for your metal clay.
Tips! Place a layer of cling film between your clay and cutter to create soft, rounded edges. Add texture before cutting to keep your designs sharp and centred.
Care Instructions: Hand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.
Safety Notice: This product is not a toy and is not suitable for children. Choking Hazard
Material: Made from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.
How They’re Made: Each cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.
Micro Cutters Blade sharpness- 0.3/0.4m
Set of 29 ring cutters - A - Z+3
