Product Description
Double Heart Cutter from Sully's Clay. Make unique shaped jewellery with these super easy to use cutters.
Create clean and consistent shapes for your metal clay or polymer clay jewellery designs. The razor-thin blade (0.3-0.4mm) cuts through the clay like butter, just pop some non-stick solution on your cutter before you press into your clay.
Perfect for making earrings, charms, pendants, and more! Designed and made in the UK by the wonderful Sully's Clay.
How to Use: Prepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.
Cut the Clay - Place the cutter on the clay and press down to cut the shape.
Clay Stuck? - Apply a small amount of oil to the end of the push pen.
Dry and Fire - Let the clay dry completely, then fire it according to the instructions for your metal clay.
Tips! Place a layer of cling film between your clay and cutter to create soft, rounded edges. Add texture before cutting to keep your designs sharp and centred.
Care Instructions: Hand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.
Safety Notice: This product is not a toy and is not suitable for children. Choking Hazard
Material: Made from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.
How They’re Made: Each cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.
Micro Cutters Blade sharpness- 0.3/0.4m
Available in 35 x 32.5mm (inner heart 15 x 14mm)
