Replacement collets for Foredom Rotary Micromotors. Suitable for the handpieces that comes in the Foredom Micromotor kits K.1030, K.1050, and K.1070.
Available in 3 different sizes:
- 2.35mm (3/32″) - HP4-117
- 1/8″ (3.18mm) - HP4-117B
- 3.0mm - HP4-117C
For information on how to change your collet, please first read the instructions that came with your handpiece, then see the videos above according to the handpiece you have.
SUITABLE FOR THE FOLLOWING HANDPIECES
These collets will fit these Foredom micromotor handpieces:
- H.MH-150 with serial numbers beginning with 811xxxx and higher (this is the current model, post 2008)
- H.MH-15018 with serial numbers beginning with 811xxxx and higher (this is the current model, post 2008)
These Collets will also fit these discontinued micromotor handpieces:
H.MH-145 H.MH-145A H.MH-135
HAVE AN OLDER HANDPIECE?
Please note these collets will NOT fit H.MH-150 & H.MH-15018 with Serial Numbers 807XXXX and lower (prior to Nov 2008).
Videos Hide Videos Show Videos
Portable Micromotor with Lithium Ion Battery
Foredom's K.1030 Micromotor runs on a charge for 5 hours or al...
Foredom Collet Change-K.1050 Micromotor
Shows you how to change collets in K.1050 micromotor handpiece...
Foredom K.1070 Micromotor Collet Change
How to change collets in K.1070 micromotor handiece. Purpose o...