Product Description
Ring Band Cutters come in 5 sizes from Sully's Clay! Make different signet ring designs with these super easy to use cutters!
These ring band cutters come in all the size you could need:
- 15 x 100mm Slim Tapered Signet
- 16 x 100mm Oblong
- 16 x 100mm Round Signet
- 18 x 100mm Tapered Signet
- 18 x 100mm Signet
- Or get the complete set of 5!
Create clean and consistent rings in metal clay or polymer clay. Each cutter is 100mm long and comes in 5 different shapes.
How to Use: Prepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.
Cut the Clay - Place the cutter on the clay and press down firmly to cut the strip. Gently lift the cutter off the clay.
Shape - Form the strip of clay around a mandrel or circular shape (the ring moulds also work great for this!) trim off any excess clay if needed.
Dry and Fire - Let the clay dry completely, then fire it according to the instructions for your metal clay.
Tips! Place a layer of cling film between your clay and cutter to create soft, rounded edges. Add texture before cutting to keep your designs sharp and centred.
Care Instructions: Hand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.
Safety Notice: This product is not a toy and is not suitable for children. Choking Hazard
Material: Made from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.
How They’re Made: Each cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.
Micro Cutters Blade sharpness- 0.3/0.4m
Available in;
- 15 x 100mm Slim Tapered Signet
- 16 x 100mm Oblong
- 16 x 100mm Round Signet
- 18 x 100mm Tapered Signet
- 18 x 100mm Signet
- Or get the complete set of 5!
