Foredom Motor LX Pendant/Hang-up Motor with Deluxe Stone Setting Kit

No reviews. Leave a review
£354.17 (Exc Tax)
£425.00 (Inc Tax)
Current Stock:
SKU:
106-K2245-21

Foredom is the world leading manufacturer of flexshafts. This LX pendant hanging motor with a flexshaft is their specialised high torque and low speed motor.

This permanent magnet motor is the ideal choice for jobs where you need more power and more control, like stone setting, wax modelling, and pearl drilling.

Why is the label red rather than blue - is this a fake?!
No, the label is red to show it is a UK 230 voltage motor, rather than a US voltage.
Any Foredom hanging motor you buy in Europe SHOULD have a red label. If it is blue it is designed for 110V!

Deluxe Stone Setting Kit includes:

  • LX Pendant Hang-Up Motor
  • Foot Pedal Speed Control (C.TXR-2)
  • 2 x Handpieces: H.18 and H.15 
  • 13pc Accessory Kit with stone setting drill bits and burrs. 
  • Flexible Shaft Grease

Motor Description: 
The LX ball bearing motor feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredoms drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom's quick disconnect handpieces. This motor and speed combination is CE compliant and meets all electrical and safety requirements. 230 V version with a three pin fused UK plug.

Speed Control Description:
CE compliant speed control features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range.  Important: Foredom's permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. 

Two year limited warranty on motor and foot speed control. 

Speed Control Description:
Handpieces Description:

  • H.18 is for use with 2.35mm (3/32″) shank burs only. Quickly change accessories with a simple press lever action. It features a very slim grip and pre-lubricated ball bearings that do not require any lubrication.
  • The H.15 Handpiece includes an anvil point, and has a hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewellers for stone setting and decorative work. Hammer has 1/32″ stroke and its impact can be adjusted from light to heavy by turning the silver adjusting ring. Please note - It requires periodic lubrication.

 

The Foredom flex shaft system is designed to allow interchangeability of most handpieces

A selection of Foredom hammering anvil points available separately here.

No one has reviewed this product! Write a Review

Related products

Customers also Viewed