Use this Efcolor Adhesive to enamel curved shapes and vertical side pieces with Efcolor powder!
To Use: Stir the glue before using, then coat your item in a thin layer of the adhesive with a paint brush. Leave for 5-10 minutes for it to go tacky, then apply a thin coat of Efcolor enamel powder. Gently tap off any excess powder onto a sheet of paper, then heat in an Efcolor stove or oven. Repeat this process as necessary to achieve your desired finish by cooling after each stage, or apply more powder straight after removing your item from the heat while it's still hot.
You can also paint a design using the adhesive on a blank or cooled piece, sprinkle a contrasting coloured powder over, then remove the excess powder to reveal the design. Reheat the piece to set the pattern.
Only for use with Efcolor cold enamel powders.