Padico Silicone Waterdrop mould with 3 moulds in 1!
Only approx. 1g of UV resin is needed per drop.
If using UV resin, we recommend curing once, then turning upside down and curing again to ensure UV light reaches all areas.
- 1 x Whole water drop
- 1 x Water drop with gap for eyelet bail
- 1 x Eyelet
Size of water drop: 15 x 10mm
Size of eyelet: 5 x 8.7mm
Size of mould: 37 x 54mm
(Please see photos for more dimensions.)