Product Description
House 3D Silicone Mould
This mould includes 3 sizes of houses with doorways and chimneys and a small fir tree. You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin!
To use with metal clay:
- Fill both sides of the the mould with wet clay, ensure the clay is pushed in all the way down into the shape. The mould is transparent so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles.
- Leave to dry in the mould. Be patient with the drying! It takes longer than you think to dry whilst in the mould, as the heat only gets in from the top. If you try to pull the moulded shapes out too soon, you'll wreck or distort the shape. We recommend drying for over 24 hours in a warm dry room. You can speed it up by putting the mould in a dehydrator or toaster oven (keep the temperature under 90C).
- Once dry, gently push the pieces out of the mould, if you are creating a 3D shape take both sides and secure them together with some Art Clay Paste.
Size of mould when together: 45 x 37 x 18mm approx
- Large house is approx 20 x 15 x 20mm
- Medium house is approx 15 x 12 x 15mm
- Small house is approx 10 x 8 x 10 mm
- Tree is approx 6 x 15 mm
Oven safe to 180°C