The increased thickness allows you to create 3D folded structures with clean, beautiful edges that don’t crack or break. The less fragile consistency of the Paper Type Plus means it can easily be bent, folded and cut with scissors and or blades. Perfect for creating Origami jewellery!
Do not apply any additional moisture onto the surface when you work with the paper, as that can cause it to disintegrate. Repair or refine with Art Clay Paste Type or Art Clay Overlay Paste AFTER FIRING. ** Using paste on unfired paper can cause it to crumble due to the moisture in the Paste.
Store unused Paper Type in a grip-seal bag and keep in an airtight container at room temperature.
Kiln fire only:
Place into a cold kiln. Fire at a full ramp to 850°C and hold for 20 minutes or 800°C for 30 minutes.
Art Clay Paper Type Plus shrinks 8-9% after firing.
35g. Measures 8.5cm x 8.5cm (approximately 0.6mm thick).
96% fine silver prior to firing - 99.9% fine silver after firing.
Really loved using this new product. I’ve used the paper type before but found that one of my designs snapped at the fold but the + type is thicker and therefore the fold is much stronger. I will definitely be using this again
