Product Description
Silicone Mould - Plump Cherry Blossoms
This mould includes 20 sizes of plump cherry blossoms and petals! You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin!
To use with metal clay:
1. Fill the mould with wet clay, ensure the clay is pushed in all the way down into the shape. The mould is transparent so it makes it easy to check, simply turn it over and ensure it is completely filled and there are no air bubbles. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier.
2. Leave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend drying for over 24 hours in a warm dry room. You can speed it up by putting the mould in a dehydrator or toaster oven (keep the temperature under 90C).
3. Once dry, gently push the pieces out of the mould.
Size of mould: 50 x 30 x 6mm approx.
The cherry blossoms range from 16 - 3mm.
The extra petals allow you to make the blossom really plump!
Oven safe to 180°C